HP-DC1210-09 120W DC CCTV Power Supply Box

HP-DC1210-94 series 120W DC CCTV power supply boxes are independently developed by Shenzhen Hynapower Technology Co., Ltd. 115VAC or 230VAC input , 12Vdc, 9 channels total 10A output, comply with EN61000-3-2 standard.

HP-DC1210-09 is iron shell, which is sturdy and reliable and could improves the heat dissipation effect of the whole power supply box. The efficiency is as high as 85% or more. Under air circulation conditions, the power supply can work at an ambient temperature of -10℃ to +40℃. Perfect solutions for CCTV systems.

Product Inquiry

Catalog:

DC Power Boxes

Keyword:

HP-DC1210-09 120W DC CCTV Power Supply Box

Product Features

Product Specifications

Ordering Information

Product Features

Input：115〜264VAC（optional）
Output： 12V
Output max power：120W
Universal input voltage
short-circuit/overload, over-voltage/over-temperature protection
High reliability, high efficiency
Natural cool
100% full load aging test
Comply with UL508 (industrial control equipment) certification standards
N61000-6-2(EN50082-2)Industrial immunity
Work temperature：-10〜40℃
MTBF50000 hours
EMI：FCC Part 15. CISPR(EN55022) class A
EMS：EN61000-4-2(ESD)，EN61000-4-3(RS)
EN61000-4-4(EFT)，EN61000-4-5(Surge)
EN61000-4-6(CS)，EN61000-4-6(Common mode conduction)
Warranty：2years

Product Specifications

Input Specification
Project	Specifications	Remarks
Input Voltage Range	115-264Vac (optional)
Input Frequency Range	47Hz～63Hz
Input Current	<3A/115Vac <1.5A/230Vac
Inrush Current	60A/115Vac 60A/220Vac	Cold Start Condition
Efficiency	≥87%	Rated Voltage; Full Load
Power Factor	/

Output Specification
Model	HP-DC1210-09
Output Voltage	12V
Output Current Range	0～10A
Voltage Accuracy	± 2.0%
Output Power	120W
Source Regulation	± 1.5%
Load Regulation	± 1%
Ripple Noise	<200mV
Efficiency	≥87% typ.
Minimum Load During Test	10% of full load power
Test Conditions	20MHz bandwidth, a 10uF electrolytic capacitor and a 0.1uF polyester capacitor are connected in parallel at the load end for testing

Safety Requirements
Insulation Strength and Insulation Resistance
Project	Specifications
	Insulation Strength*	Insulation Resistance**
Input-----Output	3.00KVac	≥100MΩ
Input-----Ground	2.0KVac	≥100MΩ
Output-----Ground	0.5KVac	≥100MΩ
Remarks	Indicates withstand voltage level (V); allowable maximum leakage current (mA). *Test conditions: Test voltage is 500VDC, 90%RH.
Leakage Current	2mA<240VAC
Project	Specifications
110Vac	/
220Vac